Kegging & Dispensing Equipment

Universal Post - 5/8 Female Thread These stainless steel universal posts can connect to gas and liquid disconnects. The female 5/8 thread makes it ...

The Intertap SS model is polished 304 stainless steel with a smooth bore to aid a completely laminar flow and foam free dispensing of beer.Typicall...

This push in valve will protect your regulator from the dreaded back flow. Two sizes available: 8mm or  5/16" Outside Diameter (OD)  9.5mm or 3/8"...

The push in fittings are suitable for use up to 100 psi. Easy to use, simply push your beer and gas line straight into these fittings so no need to...

These brushes are 8mm diameter and 76cm long so you can feed them into small diameter tube to clean it out.

MK2 Nylon regulator washer

Gas Manifold with 3 Lines

The pluto beer guns have become an iconic beer dispensing tool used throughout the industry.BARB: This Premium Full Stainless steel version, comes ...

Barbed Connection.

These push-in fittings / union connectors are suitable to be used up to 100 psi. They are extremely easy to use and allow you to simply push your ...

These Stainless Short shanks are suitable to attach taps to a font. They come with:- Shank with a 6mm tail attached- Ring collar- Nut- Right angle ...

The ABS unit is a cost effective way to dispense or as a backup, chrome plated with stainless steel barb & internals. Suits 4mm-6mm beer line. 

Counter/bench-top stainless steel drip trays.

This high quality push fit adapter is used to attach directly onto a commercial coupler, then enables you to simply push your beer line directly in...

Pressure Relief Valve with ring pull suitable for Cornelius keg lids

Machined from 304 stainless steel, these stainless splicers attach: 4mm-6mm ID line to 7mm-9mm ID line: 6-8mm Splicer 7mm-9mm ID line to 9mm-11mm ...

Features:- Made complete from aluminium, brass and stainless steel.- Includes screw holes at top for easy mounting to your gas board.- Each ball va...

Machined from 304 stainless steel, these stainless joiner barbs join: 4mm-6mm ID line: 6mm Joiner Barb 7mm-9mm ID line: 8mm Joiner Barb 9mm-11mm I...

These are high quality set & forget Mini CO2 Regs.  Once you set the pressure, at 5psi for example, the regulator will maintain the keg at that...

Short/Gas Stainless Keg Dip Tube suitable for Cornelius style kegsComes with a dip tube o-ring

Seal kit for the Ultratap SS (8019) model. Complete set of seals to service you Ultrataps. - Shank washer- Shuttle Seal- Nozzle O-Ring- Handle S...

5/8 Inch Hex Nut for Keg Coupler or Tap ShankUsed to attach either the Angle Barbtail or the Straight Barbtail

These great little adaptors screw directly onto your keg setup. They allow you to push your beer/gas line with 8mm OD (5/16") directly into the fit...