Grainfather

Gone are the days huffing and puffing trying to get that silicon ring to behave when setting up your Grainfather G30! Upgrade your G30 and supercha...

Features: • Reduce condensation on the Conical Fermenter caused by low fermentation temperatures.• Made from high quality 5mm thick SBR foam.• Con...

Allows you to connect additional Conical Fermenters to the Grainfather Glycol Chiller. If you purchase additional Conical Fermenters you will need...

This heat insulation jacket is designed to be used with the Grainfather to keep heat contained in the boiler and maintain a constant temperature du...

Replacement Cone plug seal for Grainfather Conical Fermenter

Transform the G40 or G70 Brewing System into a home distillery with the G40 & G70 Distilling Lid. This lid features an industry standard 4” tr...

Simply plug the Whirlpool Arm into the G40 or the G70 recirculation pipework to easily create a whirlpool with no manual stirring necessary. The w...

Power cable for the G70 & to upgrade your G40 from 10 to 15 amp (NZ/AU only). A 15 amp cable provides a huge power boost when compared to the 1...

The Ball Valve Tap is to be used with the G70 and G40 to allow quick drainage from the bottom of the unit. Made with high temperature resistant 30...

Grainfather G30 & G70 Top Overflow Pipe.

Easy to assemble, this simple addition fits between the overflow inlet and the top mash plate and prevents particles moving down the overflow pipe.

Easily attach to the Grainfather Conical Fermenter, for a clean andsimple way to transfer your beer without the need to lift the fermenter to perfo...

Whirlpooling and aerating is good practice before you pump the wort out of your brewing system. It infuses oxygen which promotes enhanced yeast ac...

This redesigned perforated grain basket for the Grainfather G70 Brewing System removes the need for a top plate & any additional pipework. 

Replacement/Spare part. For use with the Grainfather Conical Fermenter.

Replacement part for the Grainfather Connect brewing system.  

The GCA Kit is compatible with almost any fermenter, so you can connect to the Grainfather Glycol Chiller and still have access to accurate tempera...

Grainfather G30 Rubber Gasket (for inlet pipe to pump).

Temperature control is one of the most crucial elements for producing a good quality beer. It needs to be regulated and stable throughout the whole...

This basket comes as a standard with the G30v3 but can be purchased as an upgrade for previous versions of the G30 Brewing System. A redesigned pe...

Replacement Grainfather recirculation barb & hose (1.6m) for the Grainfather G70v2. Not compatible with V1.

This is a replacement Grainfather Grain Basket Lifting Bar for use with all versions of the G30 Brewing System.

G40 & G70 Distilling Lid plus the complete set of fittings to connect the Still Spirits T500 Alembic Condenser to either the G40 or the G70 for...