Fittings and Accesories

Allows you to connect additional Conical Fermenters to the Grainfather Glycol Chiller. If you purchase additional Conical Fermenters you will need...

Replacement temperature probe for Keg Master Series 4 kegerators.

Stainless Steel Diffusion Stone - 2 micron

This heat insulation jacket is designed to be used with the Grainfather to keep heat contained in the boiler and maintain a constant temperature du...

Lid for a 30 litre plastic fermenting pail (the one's with a handle). The lid is pre drilled for fit a grommet and airlock for fermenting. 

Transform the G40 or G70 Brewing System into a home distillery with the G40 & G70 Distilling Lid. This lid features an industry standard 4” tr...

Simply plug the Whirlpool Arm into the G40 or the G70 recirculation pipework to easily create a whirlpool with no manual stirring necessary. The w...

Power cable for the G70 & to upgrade your G40 from 10 to 15 amp (NZ/AU only). A 15 amp cable provides a huge power boost when compared to the 1...

The Ball Valve Tap is to be used with the G70 and G40 to allow quick drainage from the bottom of the unit. Made with high temperature resistant 30...

Easy to assemble, this simple addition fits between the overflow inlet and the top mash plate and prevents particles moving down the overflow pipe.

25 Litre Jerry Can

Stainless Steel Float & 60cm Silicon.

Replacement/Spare part. For use with the Grainfather Conical Fermenter.

The GCA Kit is compatible with almost any fermenter, so you can connect to the Grainfather Glycol Chiller and still have access to accurate tempera...

Grainfather G30 Rubber Gasket (for inlet pipe to pump).

Spundy Supreme - Compact Spunding Valve With Gas Harvesting The single batch beer you’re fermenting is going to create between 200 and 300 litres o...

Spundy - Replacement Gauge for Compact Spunding Valve. This gauge reads from 0 to 30psi and screws into place on the Spundy Compact Spunding Valve....

Replacement Grainfather recirculation barb & hose (1.6m) for the Grainfather G70v2. Not compatible with V1.

This is a replacement Grainfather Grain Basket Lifting Bar for use with all versions of the G30 Brewing System.

G40 & G70 Distilling Lid plus the complete set of fittings to connect the Still Spirits T500 Alembic Condenser to either the G40 or the G70 for...

This Grainfather Distilling Lid T500 Reflux Condenser Attachment Kit paired with the G40 or the G70 offers an all-in-one automated brewing system t...

Turn your 20L Grainfather into a 10L version with the 10 L Micro Pipework. This is perfect for brewing smaller test batches, or for those who simp...

Replacement controller for the Grainfather G40.

This kit enables you to turn your 35L Snub Nose Fermenter in to a Generation 3 Snub Nose Fermenter with the lid that has a dryhopping port and t...